Mitsubishi Outlander XL. Manual — part 1206
MOTORS AND TRANSISTOR
REMOVAL AND INSTALLATION
M15502000923USA0000010000
ZC600334
1
2
3
4
0000
5
Blower motor removal steps
·
Bottom cover assembly (passenger's
side) (Refer to GROUP 52A -
Instrument Panel P.52A-2).
1.
Blower motor
Power transistor removal steps
·
Bottom cover assembly (passenger's
side) (Refer to GROUP 52A -
Instrument Panel P.52A-2).
2.
Power transistor
Air mix damper motor removal
steps
·
·
Air mix damper motor removal
steps
3.
Air mix damper motor
Removal steps for outside air /
inside air circulation switching
damper motor
·
·
4.
Outside/inside air selection damper
motor
Removal steps for air outlet
changeover damper motor
·
·
5.
Air outlet changeover damper motor
AIR CONDITIONING
55A-115
MOTORS AND TRANSISTOR
INSPECTION
M15502000924USA0000010000
BLOWER MOTOR CHECK
ZC600454 0000
Check that the motor turns when applying battery power
between the connector terminals. Also check to see that there
is no abnormal sound emitted from the motor at this time.
AMBIENT TEMPERATURE SENSOR
REMOVAL AND INSTALLATION
M15502000926USA0000010000
ZC6004650000
1
Removal steps
·
Front bumper grille
Removal steps
1.
Ambient temperature sensor
INSPECTION
M15502000927USA0000010000
AMBIENT AIR TEMPERATURE SENSOR CHECK
ZC601994AA00
RESISTANCE
(k
W
)
TEMPERATURE ºC (ºF)
8
6
4
2
0
9
7
5
3
1
-10
0
20
40
(14)
(32)
(68)
(104)
30
(86)
10
(50)
10
Measure the resistance between the sensor terminals under at
least two temperatures. The resistance values should meet the
values shown.
NOTE:
The temperature should be within the shown range.
55A-116
AIR CONDITIONING
AMBIENT TEMPERATURE SENSOR
A/C-ECU
REMOVAL AND INSTALLATION
M15502000935USA0000010001
Pre-removal and Post-installation Operation
Glove Box and Bottom Cover Assembly (passenger's side) Removal and Installation (Refer to GROUP 52A - Instrument
ZC600336
A/C-ECU
0000
COMPRESSOR ASSEMBLY
REMOVAL AND INSTALLATION
M15502000044USA0000010000
Pre-removal Operation
⦆
Refrigerant Discharging (Refer to P.55A-119).
⦆
Front Bumper Under Cover (Refer to GROUP 51A, FRONT
⦆
Front Under Cover RH (Refer to GROUP 51A, UNDER
Post-installation Operation
⦆
Drive Belt Tension Adjustment (Refer to GROUP 00,
Maintenance Service - Drive Belt P.00-58).
⦆
Refrigerant Charging (Refer to P.55A-119).
⦆
Front Bumper Under Cover (Refer to GROUP 51A, FRONT
⦆
Front Under Cover RH (Refer to GROUP 51A, UNDER
AIR CONDITIONING
55A-117
A/C-ECU
ZC602016
1, 2
3
5
3
2
1
4
0000
3
N
N
25 ± 4 N·m
18 ± 4 ft-lb
23 ± 6 N·m
17 ± 4 ft-lb
A/C compressor oil:
SUN PAG 56
-Pipe coupling
25 ± 4 N·m
18 ± 4 ft-lb
Removal steps
<<A>>
1.
Flexible suction hose connection
<<A>>
2.
Flexible discharge hose connection
3.
O-ring
Removal steps
<<B>>
4.
Drive belt
<<C>>
>>A<<
5.
A/C compressor
REMOVAL SERVICE POINTS
<<A>> FLEXIBLE SUCTION HOSE AND FLEXIBLE
DISCHARGE HOSE DISCONNECTION
As the compressor oil and receiver are highly moisture
absorbent, use a non-porous material to plug the hose and
nipples.
To prevent the entry of dust or other foreign bodies, plug the
dismantled hoses and compressor nipples.
<<B>> DRIVE BELT REMOVAL
Refer to GROUP 11A, Crankshaft pulley P.11A-21.
<<C>> A/C COMPRESSOR REMOVAL
Take care not to spill any compressor oil when removing the
compressor.
55A-118
AIR CONDITIONING
COMPRESSOR ASSEMBLY
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст