Mitsubishi Outlander XL. Manual — part 743
CENTRAL DOOR LOCKING SYSTEM CHECK
M14203000908USA0000010000
⦆
Check that the central door locking system works by operating
the driver's door key cylinder or the door lock switch. If it does
not operate, perform troubleshooting. Refer to P.42Ab-11.
NOTE:
When the inside lock knob is operated with the
driver's door opened, the driver's door is not locked.
⦆
Check whether the driver's door is opened when the driver's
door inside handle is pulled with all the doors locked. If it does
not operate, replace the driver's door latch assembly. Refer
to P.42Ab-102.
KEY-IN PREVENTION FUNCTION CHECK
M14203000909USA0000010000
Check that the driver's door is not locked when the key cylinder
or door lock switch is operated with the driver's door opened. If
it is locked, replace the door latch. Refer to P.42Ab-102.
SELECTOR "P" POSITION-LINKED DOOR
UNLOCKING FUNCTION CHECK
M14203000910USA0000010000
When the selector is moved to the P (parking) position with the
ignition switch on, all the doors and the liftgate will be unlocked.
Carry out troubleshooting if the door is unlocked. Refer to P.
42Ab-11.
NOTE:
The selector "P" position-linked door unlocking
function can be switched with the customization function.
Confirm it before check. Refer to P.42Ab-94.
DOOR
42Ab-91
ON-VEHICLE SERVICE
DOOR OUTSIDE HANDLE ASSEMBLY PLAY
CHECK
M14203000016USA0000010000
ZC600073
A
A
B
0000
Section A – A
1.
Check that the door inside handle assembly play meets the
standard value.
Standard value (B): 0.1 - 5.2 mm (0.004 - 0.2 inch)
[Target value: 2.5 mm (0.1 inch)]
2.
Check the door outside handle assembly and door latch
assembly, and replace them if they are out of the standard
value.
42Ab-92
DOOR
ON-VEHICLE SERVICE
DOOR INSIDE HANDLE CHECK
M14203000015USA0000010000
DOOR INSIDE HANDLE KNOB PLAY CHECK
ZC600074
A
A
B
0000
Section A – A
1.
Check that the door inside handle knob play meets the
standard value.
Standard value (B):
Front driver’s side: 10.0 - 23.7 mm (0.39 - 0.93 inch)
[Target value: 17.0 mm (0.67 inch)]
Except Front driver’s side: 5.0 - 18.7 mm (0.2 - 0.74
inch) [Target value: 12.0 mm (0.47 inch)]
2.
Check the door inside handle and door latch assembly, and
replace them if they are out of the standard value.
DOOR INSIDE HANDLE LOCK KNOB STROKE
CHECK
1.
Remove the door trim assembly (Refer to GROUP 52A - Door
Trim P.52A-11).
DOOR
42Ab-93
ON-VEHICLE SERVICE
ZC600075
A
B
0000
A
Section A – A
2.
Check that the stroke of the door inside handle lock knob
meets the standard value.
Standard value (B): 13.7 - 15.0 mm (0.54 - 0.59 inch)
[Target value: 14.7 mm (0.58 inch)]
ZC6000760000
Clip
Outer cable end
Inside lock
cable
Door inside handle
3.
If it is outside the standard value, adjust the stroke of the inside
handle lock knob by using the outer cable end, which connects
the inside handle lock knob to the inside lock cable.
CUSTOMIZE FUNCTION
M14203000976USA0000010000
With the scan tool MB991958 operation, the following
functions can be programmed. The programmed
information is held even when the battery is
disconnected.
Adjustment
item (scan tool
MB991958
display)
Adjustment item
Adjusting
contents
(scan tool MB991958
display)
Adjusting contents
Door
unlock
mode
Door lock system
All doors unlock
All the doors are unlocked when the driver's
side door is unlocked.
Dr door unlock
Only the driver's side door is unlocked when
the driver's side door is unlocked. (default)
Auto
door
unlock by P
position
Auto door unlock by
P position function
Disable
Without function (default)
Always enabled
Always with function
P/W unlocked
With function (with power window
unlocked)
42Ab-94
DOOR
ON-VEHICLE SERVICE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст