Dodge Dakota (ND). Manual — part 1220
INSTALLATION
1. Position the tailgate check cable(s) (3) onto the tail-
gate, install the bolt (1) that secures the tailgate
check cable (3) to the left and right side of the tail-
gate as necessary. Tighten bolt to 23 N·m (17 ft.
lbs.).
2. Slip the cable over the bolt on the cargo box until it
snaps on, securing the lock tab(s) (4).
23 - 292
TAILGATE
ND
LATCH
REMOVAL
1. Remove the bolt (2) that secures the tailgate check
cable (3) to the tailgate.
2. Remove the second bolt (2) to the latch (4) and
remove from the side of the tailgate.
3. Remove the release handle link (5) from the latch
(4).
INSTALLATION
1. Connect the release handle link (5) to the latch
assembly (4).
2. Position the latch assembly (4) into the tailgate and
install the upper bolt (2).
ND
TAILGATE
23 - 293
3. Install the bolt (2) that secures the tailgate check
cable (3) to the tailgate. Tighten both bolts to 23
N·m (17 ft. lbs.).
LATCH STRIKER
REMOVAL
1. Open the tailgate and remove the striker (1) from
the cargo box.
23 - 294
TAILGATE
ND
INSTALLATION
1. Install the latch striker (1) and tighten to 34 N·m
(25 ft. lbs.).
RELEASE HANDLE
REMOVAL
NOTE: If equipped with a tailgate cover, it must be
removed to access the release handle mounting
bolts.
1. Remove the three mounting screws (2) to the
release handle (1).
2. Pull out the release handle (2) far enough to dis-
connect the tailgate latch links (3) from the clips
(1).
ND
TAILGATE
23 - 295
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст