Dodge Durango (HB). Manual — part 1393
GRILLE
REMOVAL
1. Remove the push pin fasteners and remove the
upper radiator shroud.
2. Remove the upper bolts (1) and separate the four
side clips.
3. From underneath, remove the push pins (3) and
remove the grille.
INSTALLATION
CAUTION: Do not use a hammer or mallet to
install the upper radiator shroud push pins, due to
potential damage to the grille.
1. Install the grille (2) and seat the side clips fully.
2. From underneath install the push pin fasteners (3).
3. Install the upper bolts (1) and tighten to 13 N·m (10
ft. lbs.).
4. Install the upper radiator shroud and install the
push pin fasteners.
HB
EXTERIOR
23 - 85
RACK-LUGGAGE
DESCRIPTION
LUGGAGE RACK
1 - RAIL ASSEMBLY
2 - SCREWS (5 PER RAIL)
3 - RIV NUTS
23 - 86
EXTERIOR
HB
BOARD-RUNNING
DESCRIPTION
RUNNING BOARD
1 - RIV NUTS
2 - BOLTS 23 N·m (17 ft. lbs.)
HB
EXTERIOR
23 - 87
LINER-FRONT FENDER
DESCRIPTION
FRONT FENDER LINER
1 - FRONT FENDER
2 - LINER
3 - PLASTIC RIVETS (7 PER SIDE)
23 - 88
EXTERIOR
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст