Skoda Enyaq (2021 year). Manual in english — page 11
220 12 volt vehicle battery and fuses › Fuses in the space under the front flap
Fuse
Fuse
Consumer
Consumer
number
number
37
Electric boot lid
63
Not used
38
Seat ventilation
64
Not used
39
Heated steering wheel
65
Not used
40
Alarm horn
66
Rear window wiper
41
Databus
67
Heated rear window
42
Transmission operation, transmission mode display
Front air conditioning, rear air conditioning, rear win-
43
dow heating
Fuses in the space under the front flap
Front interior lighting, parking brake, rain light sen-
Overview
44
sor, operation of the light function, alarm system, di-
agnostic connection, button bar in the control panel
Access to the fuses
45
Control lever under the steering wheel
46
Infotainment screen, Head-up display
› Simultaneously press the locking
buttons on the fuse box cover and
47
Adaptive Chassis Control (DCC)
remove the cover.
48
Rear USB
49
Not used
› Change the fuse.
50
Not used
› Fit the cover and click into place.
51
Not used
52
12 volt socket in the luggage compartment
53
Not used
54
Not used
55
Not used
56
Not used
NOTICE
57
Not used
Danger of water entering the fuse box.
58
Parking aid (Park Assist)
▶ Fit the cover correctly and click into place securely.
Air conditioning + heating, interior mirror with auto-
59
matic dimming, USB at the rear
60
Diagnostic connection
61
Drive system
62
Not used
12 volt vehicle battery and fuses › Fuses in the space under the front flap
221
Fuses overview
Fuse
Consumer
number
15
Assistance system ESC
16
Radiator fan
17
Heated windscreen
18
Not used
19
Not used
20
Not used
21
Not used
22
Not used
23
Engine control system
24
Radiator fan
25
Coolant pump, electric heating
26
Coolant pump, radiator shutter
Fuse
Consumer
27
Not used
number
28
Not used
1
Not used
29
Not used
Assistance system ESC, BDM control system, coil of
30
Not used
2
the main relay
31
Not used
3
Charger for the high-voltage battery, electric drive
32
Brake servo
4
Left headlight
5
Right headlight
6
Radar sensor in the front
7
Not used
8
Not used
9
Horn
10
Windscreen wiper
11
Air conditioning
12
Engine sound generator
13
Assistance system ESC
14
Not used
222 Wheels › Tyres and rims
WARNING
Wheels
Vehicles with a 150 kW electric motor have di erent tire sizes
Tyres and rims
on the front and rear axles.
▶ Do not exchange wheels on these vehicles.
What you should be mindful of
Advice for tyre assembly
NOTICE
› With directional tires, the correct direction of rotation must be
▶ Protect tyres from contact with lubricants and fuel.
observed. The direction of rotation of the tyres is marked by
▶ Always store wheels or tyres in a cool, dry and, where possible,
arrows on the wall of the tyre.
dark place. Tyres without rims should be stored in an upright
› Always replace the tyres by the axle.
position.
Additional information
▶ Alloy rims can be damaged by grit.
Only fit radial tyres of the same type, size (rolling circumference)
▶ Do not use light alloy rims with a high-sheen surface in wintry
and the same tread pattern on one axle.
weather conditions or with snow chains
Approved tyre sizes are specified in the technical vehicle docu-
Causes of uneven tyre wear
mentation and in the declaration of conformity (in the so-called
▶ Improper tyre pressure.
COC Document).
▶ Driving style (e.g. fast cornering, rapid acceleration and decel-
The declaration of conformity can be obtained from a ŠKODA
eration).
Partner (valid for some countries and some models).
▶ Wheel alignment errors.
▶ Incorrect wheel balancing.
Overview of tyre labelling
Wheel changes
Applies to vehicles with 132 kW electric engine.
Explanation of tyre markings
e.g. 235/55 R 19 101 T
For uniform wear on all tyres, we
recommend that you change the
235
Tyre width in mm
wheels every 10,000 km according
55
Height/width ratio in %
to the schedule.
R Code letter for the type of tyre - Radial
19
Diameter of wheel in inches
101 Load index
T Speed symbol
Applies to vehicles with 150 kW electric engine.
Wheels › Tyres and rims 223
Load index
Tread wear indicators
The load index indicates the maximum permissible load for each
Wear indicators are located in the
individual tyre.
profile of the tyres that display the
100 800 kg
permissible minimum tread depth.
101 825 kg
Markings on the walls of the tyres
102 850 kg
with the letters TWI or other sym-
103 875 kg
bols (e.g.
) indicate the position of
Speed symbol
the wear indicators.
The speed symbol indicates the maximum permissible speed for
A tyre is to be regarded as worn out
a vehicle fitted with tyres in the category concerned.
when this wear indicator is flush
S
180 km/h
with the tread.
T
190 km/h
The tread depth can be measured using a tread depth gauge
U
200 km/h
on the ice scraper. The ice scraper is located on the inside of the
H
210 km/h
boot lid.
V
240 km/h
WARNING
W
270 km/h
Risk of accident!
Y
300 km/h
▶ Do not use worn tires.
WARNING
Tyre manufacturing date
▶ Do not exceed the maximum permissible load and speed for
The date of manufacture is indicated on the tyre sidewall.
the mounted tires.
For example, DOT ... 18 20 means that the tyres were produced
in the 18th week of the year 2020.
WARNING
Risk of an accident!
▶ Do not use tyres that are older than 6 years.
Troubleshooting
Help with a flat tyre
▶ Breakdown kit » page 227.
224 Wheels › All-season or winter tires
Change of tyre pressure
› In the driver's field of view, ax a warning label with the maxi-
illuminates
mum value of the speed category intended for the tyres fitted
(applies only to certain countries).
› Stop the vehicle.
› Check the tyres and tyre pressures.
Settings
The speed limit setting for tyres is set in the Infotainment in the
All-season or winter tires
following menu
. Outside.
Usage
› By moving your finger sideways, choose the screen with the
menu item Tyres .
All-season or winter tyres improve handling in winter weather
conditions. They are characterised by ‘M+S’ and a mountaintop
› Select Tyres - select them and set the speed limit.
and snowflake symbol
Snow chains
What you should be mindful of
Usage
For the best possible handling, use tyres on all four wheels with a
The snow chains improve driving in wintry road conditions.
minimum tread depth of 4 mm.
WARNING
Change winter tyres to summer tyres at the appropriate time.
Risk of accident as well as tyre damage!
Summer tyres have better driving and braking characteristics on
▶ Do not use chains on routes that are free from snow and ice.
snow- and ice-free roads and at temperatures above 7 °C.
What you should be mindful of
Usage conditions
› Before fitting the snow chains, remove the full wheel trims.
If all-season or winter tyres are installed that have a lower speed
category than the actual specified maximum vehicle speed, then
› Only mount the snow chains on the rear wheels.
proceed as follows:
› In Infotainment, set the speed limit according to the category
Technical data
of tyres fitted.
Permitted rim/tyre combinations for mounting of snow chains:
Wheels › SEAL tyres 225
Rim size
Tyre size
Raise vehicle
8Jx19 ET45
235/55 R19
WARNING
8Jx19 ET45
255/50 R19
Always ensure the base plate of the lifting jack cannot slip!
▶
Provide a wide and firm base under the jack on loose surfaces.
Only fit snow chains with links and locks that are no larger than
▶ Create a non-slip base (e.g. a rubber floor mat) under the jack
9 mm.
on a smooth surface.
▶ Always raise the vehicle with the doors closed.
SEAL tyres
▶ Do not insert any body parts under the raised vehicle.
▶ Do not turn on ignition of the lifted vehicle.
Usage
NOTICE
The SEAL tyres have increased resistance to air leakage when
Danger of damage to vehicle!
punctured.
▶ Make sure that the jack is attached correctly to the bridge of
the sill.
When replacing SEAL tyres with standard tires, the vehicle must
have one of the following pieces of equipment.
After having been changed
▶ Spare or emergency spare wheel with corresponding tool for
› Check the tyre pressure on the mounted wheel and adjust if
replacing it.
necessary.
▶ Breakdown kit.
› In vehicles with a tyre indicator, save the tyre pressure values
in the system.
› Have the tightening torque of the wheel bolts of the mounted
Changing the wheel and raising the vehicle
tyres checked with a torque wrench as soon as possible.
The specified tightening torque is 120 Nm.
What you should be mindful of
Drive carefully until the tightening torque is checked.
Before changing
Replace the damaged tyre. It is not recommended to repair the
› Park the vehicle securely and secure it from rolling away.
tyre.
› Switch o the ignition.
› Let all of the occupants get out. During the wheel change they
should not stand on the road, e.g. behind the crash barriers.
› Close all doors, the boot and front flap.
› Uncouple any trailers.
226 Wheels › Changing the wheel and raising the vehicle
WARNING
› Place the key on the wheel bolt or
Risk of an accident!
on the attachment piece.
▶ Too low a tightening torque may cause the wheel to disengage
› Turn the screw a maximum of half
while driving.
a turn so that the wheel does not
▶ Too high a tightening torque can damage the threads and
come loose and fall o .
cause the rim to deform.
WARNING
Risk of an accident!
▶ Do not grease or lubricate screws.
▶ Do not use corroded or damaged screws.
Jacking points for the jack
Changing the wheel and raising the vehicle
Release screws
› If the vehicle has covers over the wheel bolts or wheel trims,
remove them.
WARNING
▶ If you step on the key end when loosening the screw, hold on
to the vehicle for better stability.
Some vehicles may have anti-theft
wheel bolts that protect the wheels
A
18 cm
from theft.
B
30 cm
› Insert the upper section on the an-
ti-theft wheel bolt until it stops.
Wheels › Breakdown kit 227
Position the jack and lift the vehicle
Tighten screws
›
Tighten the opposite wheel bolts including the anti-theft
wheel bolt one after the other.
› Reinstall the cover caps of the wheel bolts or the full wheel
covers.
Keep the label with the code number of the anti-theft wheel
bolts. A replacement upper section can be acquired from ŠKO-
DA original parts based on this.
Breakdown kit
› Position the jack at the jacking point closest to the wheel to be
Content overview
replaced.
› Support the base plate of the jack with its full area resting on
The kit is located in a box under the floor covering in the luggage
level ground and ensure that the jack is located in a vertical po-
compartment.
sition at the jacking point.
› Use the crank to raise the jack until its claw encloses the bar.
› Continue to lift the vehicle until the wheel is just o the floor.
Changing a wheel
› Unscrew the screws and place them on a clean surface.
› Remove the wheel carefully.
› Attach the wheel.
› Slightly screw in the screws.
› Lower the vehicle.
NOTICE
A
Sticker with speed indication
▶ Applies to wheel trims supplied ex-factory or from ŠKODA
B
Valve remover
Original Accessories: the anti-theft wheel bolt should be in-
stalled in the position marked on the back of the wheel trim.
C
Inflation hose with plug
228 Wheels › Breakdown kit
D
Air compressor (the layout of the controls may be di erent
After using the kit
depending on the type of air compressor)
If a tyre pressure of 2.0 bar cannot be achieved, the tyre is too
damaged and cannot be sealed with the puncture set.
E
Tyre inflation hose
› Stop driving. Seek the help of a specialist garage.
F
Button for pressure reduction
Once a tyre pressure of 2.0-2.5 bar is achieved, continue the
G
Pressure indicator
journey at a maximum speed of 80 km/h (50 mph).
H
12 volt cable connector
› Avoid full accelerations, strong braking and fast cornering.
I
ON and OFF switch
Information for driving with repaired tyres
J
Tyre inflation bottle
› The pressure of the repaired tyre must be checked after driv-
K
Replacement valve core
ing for 10 minutes.
› If the tyre pressure is 1.3 bar and less, do not continue! Seek
The declaration of conformity is included with the air compres-
the help of a specialist garage.
sor or the log folder.
› If the tyre pressure is higher than 1.3 bar, correct the pressure
to the correct value of at least 2 bar and continue driving.
Usage conditions
NOTICE
Danger of damage to the compressor!
Performing a repair with the breakdown kit not at all intended to
▶ After the maximum running time of the air compressor, allow
replace a permanent repair on the tyre.
it to cool for a few minutes.
The purpose of the repair is to get you to the nearest specialist
WARNING
garage.
Risk of burns!
Change the tyre repaired by the breakdown kit as soon as possi-
The tyre inflation hose and the air compressor may become hot
ble.
when inflated.
▶ Allow the air compressor and hose to cool for a few minutes.
Before using the kit
› Park the vehicle securely and secure it from rolling away.
› Switch o the ignition.
Usage restrictions
› Let all of the occupants get out. During the wheel repair they
should not stand on the road, e.g. behind the crash barriers.
Do not use the kit in the following cases:
› Close all doors, the boot and front flap.
▶ The rim is damaged.
› Uncouple any trailers.
Wheels › Tyre pressure 229
▶
The outdoor temperature is below the minimum temperature
› Once a tyre pressure of 2.0-2.5 bar is reached, turn o the air
indicated in the manual of the tyre filling bottle.
compressor.
▶ Tyre punctures are greater than 4 mm.
Observe the maximum running time of the air compressor ac-
▶ There is damage to the tyre wall.
cording to the directions of the repair kit manufacturer.
▶ The expiry date stated on the tyre inflation bottle has expired.
› If an air pressure of 2.0 - 2.5 bar has not been reached, remove
the tyre inflation hose from the valve.
› Drive approx. 10 metres forwards or backwards to allow the
Self-help
sealing agent to distribute in the tyre.
Seal the tyres
› Replace the tire inflation hose on the valve and repeat the infla-
› Unscrew the valve cap from the damaged tyre.
tion procedure.
› Unscrew the valve core with the valve insert and place it on a
clean surface.
Tyre pressure
› Shake the tyre inflation bottle back and forth with sealant.
› Screw the inflation hose onto the tyre inflater bottle. The film
What you should be mindful of
on the closure is pierced automatically.
NOTICE
› Remove the plug from the inflation hose and push it fully onto
the tyre valve.
▶ Always adjust the tyre pressure to the load.
› Hold the bottle with the bottom facing upwards and fill all of
▶ Check the pressure in all tyres at least once a month and be-
the sealing agent into the tyre.
fore each longer ride.
› Remove the filler plug from the valve.
▶ Check the pressure when the tyres are cold. Do not reduce the
higher pressure of warm tyres.
› Screw in the valve insert.
▶ After each change in tyre pressure, save the new values in the
Inflate tyres
tyre control display.
› Fit the tyre inflation hose of the air compressor to the tyre
WARNING
valve.
Risk of an accident!
› Secure the vehicle with the parking brake.
▶ If tyre pressure loss is very quick, try to stop the vehicle care-
› Turn on the ignition.
fully without heavy steering or heavy braking.
› Plug the connector into the 12 volt socket .
› Turn on the air compressor.
230 Wheels › Tyre pressure monitor
Sticker with prescribed tyre pressures
Show tyres with modified pressure
›
Select the menu item for displaying the tyre condition in menu
The sticker with the prescribed tyre pressure values is located in
the centre body pillar on the driver’s side.
A
Inflation pressure for half load
Function restriction
B
Inflation pressure for a full load
The system is unable to provide a warning in the event of a very
C
Tyre diameter in inches
rapid tyre pressure loss, e.g. sudden puncture.
This information only serves as
The system function may be restricted in the following cases:
information for the prescribed
tyre pressure. This is not a listing
▶ Uneven loading of the wheels, e.g. with a trailer attached
of approved tyre sizes for your
▶ Sporty driving style
vehicle. These are in the vehicle's technical documentation,
▶ Driving on dirt roads
as well as in the declaration of conformity (in the so-called
▶ Snow chains fitted
COC document).
D
Tyre pressure reading for the front axle tyres
Saving tyre pressure values
E
Tyre pressure reading for the rear axle tyres
Saving tyre pressure values
›
Press the button under the Infotainment.
Tyre pressure monitor
› In the displayed menu in Infotainment, tap the functional sur-
face
Functionality
› Then follow the instructions on the screen.
The tyre pressure monitoring indicator indicates a change in tyre
Save the tyre pressures in the following cases:
pressure.
▶ Change of tyre pressure
Warning when pressure changes
▶ Change of one or more wheels
illuminates
▶ Change of position of a wheel on the vehicle
› Stop the vehicle.
▶ Always after covering a distance of 10,000 km or once a year
› Check the tyres and tyre pressures.
Wheels › Wheel bolt cover caps 231
Troubleshooting
Full wheel frame
Tyre pressure display faulty
Removing and installing the trim
flashes for about 1 minute and stays on
Applies to factory built or original accessory trims from ŠKODA.
› Stop the car, turn the ignition o and on again.
Disconnecting
If the symbol flashes again after turning on ignition, there is
› Hang the clamps for removing the wheel trims at the edge of
a system fault.
one of the openings in the trim.
› Continue driving, exercising appropriate caution, and seek the
› Push the wheel wrench through the clamp, support on the tyre
help of a specialist garage.
and pull o the wheel trim.
Installing
Wheel bolt cover caps
› Press the wheel trim onto the wheel rim at the designated
valve opening.
Remove cover caps and install
When using an anti-theft wheel bolt, it must be located at the
Disconnecting
location indicated on the bezel.
› Press the trim, starting at the valve, into the rim on both sides
› Push the pull-o clamp onto the
until it engages around the entire circumference.
cover cap up to the stop.
› Remove the cover cap.
NOTICE
▶ Use hand pressure, do not hit the wheel cover.
Installing
› Push the cover cap onto the wheel bolt to the stop.
232 Storage space and interior equipment › Equipment in the boot
Storage space and interior equipment
Emergency equipment
Equipment in the boot
Overview
Emergency equipment in the boot of a vehicle without varia-
Overview
ble loading floor
A
Placing of the warning triangle
B
Positioning of the first-aid kit
and the tool kit (depending on
equipment)
C
Tool kit (depending on equip-
ment)
A
Lever for folding forward the rear seat backrests
Emergency equipment in the luggage compartment of a vehi-
B
Removable partition of the storage compartment
cle with the variable loading floor
Max. load 2.5 kg
A
Tool kit
C
Under the floor covering: Storage compartment for the
› To access the vehicle tool kit,
charging cable
remove the variable loading
D
12-Volt-power socket
floor.
B
Placing of the warning triangle
E
Trailer hitch switch
C
Placing of the first-aid kit
To access the vehicle tool kit more easily, fold the rear seat
on the right and remove or insert the tool from the area of the
rear seats.
Storage space and interior equipment › Tool kit
233
Storage compartment for the reflective vest
A
Attachment for the anti-theft wheel bolts
The storage compartment for the reflective vest is in the stor-
B
Towing lug
age compartment of the front door.
C
Bracket for removing the full wheel covers
Fire extinguisher under the passenger seat
D
Removal clip for the wheel bolt cover caps
E
Breakdown set
The declaration of conformity is enclosed with the jack or the
logbook folder.
Storage compartment for the reflective vest
Tool kit
Overview
Depending on the equipment, not all of the following compo-
nents may be included in the tool kit.
234 Storage space and interior equipment › Fasteners in the boot
Fasteners in the boot
Vehicle with variable loading floor
Overview
Vehicle without variable loading floor
A
Fold-out bag hook
Max. load 7.5 kg
B
Hook for securing the fastening nets
A
Fold-out bag hook
C
Fastener for securing the fastening nets
Max. load 7.5 kg
D
Lashing eye for securing the load and the fastening nets
B
Hook for securing the fastening nets
Max. load 75 kg
C
Fastener for securing the fastening nets
E
Lashing eyes for securing the load and the fastening nets
D
Lashing eyes for securing the load and the fastening nets
Max. load 75 kg
Max. load 75 kg
Storage space and interior equipment › Bag hooks in the boot 235
Other fasteners
Bag hooks in the boot
Vehicle without the variable loading floor / with the variable loading
floor
The maximum load for the hook is 7.5 kg.
A
Cargo-Element
Max. load 8 kg
Storage compartment with Cargoelements in the
› Fold up the cargo element and fasten it to the floor cover-
boot
ing in the boot.
The maximum load for the Cargo el-
B
Stowing compartment for Cargo-Element in the storage
ement is 8 kg.
compartment
C
Stowing compartment for the Cargo-Elements under the
variable loading floor
236 Storage space and interior equipment › Cargo elements in the luggage compartment
Cargo elements in the luggage compartment
Net partition
A storage compartment for the Car-
Attach the net partition
go elements is located under the
Unfolding/folding
variable loading floor.
The maximum load for the Cargoele-
› Open the arms of the cross bar un-
til you hear the locking button au-
ments is 8 kg.
dibly click into place.
Fastening nets
Overview
› Press the safety button and fold
the arms of the crossbar together.
The folded mesh partition can be stowed under the variable
loading floor.
The maximum load of the respective fastening nets is 1.5 kg.
Storage space and interior equipment › Double-sided floor covering 237
Attach at the back
Double-sided floor covering
Overview
Depending on the equipment, the vehicle may be equipped with
a double-sided floor covering in the luggage compartment. One
side is made of fabric, the other side is washable.
Roll-up luggage compartment cover
Operation
› Remove the roll-up cover or fold up the rear seat backrests.
Extending
› First insert the crossbar into the mount A on one side and
› Pull out the cover on the handle
push it forwards.
until it clicks into place.
› Fix the bar in the same way on the other side.
› Snap the carabiners B into the lashing eyes.
› Pull the straps firmly at the free ends C .
Fasten in the front
The procedure is analogous to the process behind.
The lashing eyes for the carabiner are located under the central
body pillars.
Loosening
Loosening takes place in the reverse order to fixing.
238 Storage space and interior equipment › Variable loading floor in the boot
Retracting
› Insert the cover into the recesses
in the panel under the loading
› Press the cover in the handle area.
floor.
The cover rolls up.
› Fold the free part of the cover for-
It is possible that the cover rolls
wards with the handle.
more slowly during winter weather
conditions.
Variable loading floor in the boot
Removing and inserting
Setting the position
Take out and insert the roll-up cover
The variable loading floor can only be adjusted in the front area.
› Press the end of the crossbar and
The maximum load of the variable loading floor is 75 kg.
take out or insert the cover.
› Lift the variable load floor and pull
it towards you.
Stowing the cover under the variable loading floor
› Remove the variable loading floor.
Or:
› Unfold the variable loading floor in the upper position and lift it
in the rear area.
Storage space and interior equipment › Organiser under the variable loading floor 239
› To set in the upper position, posi-
Organiser under the variable loading floor
tion the variable loading floor in
the front area on space B .
› To set in the lower position, posi-
tion the variable loading floor in
the front area on area A .
› Press the variable loading floor
forward as far as it can go and
place it.
Charging cable pocket
The maximum load for the pocket is
3 kg.
Removing and inserting
› Lift the variable loading floor up to a distance of about 15 cm
below the boot cover and then remove it.
› Insertion takes place in reverse order.
240 Storage space and interior equipment › Interior equipment front
Interior equipment front
› Pull the handle to open the compartment.
E
Storage tray
Overview
▶ Bottle holder with a capacity of max. 1.5 l
▶ Storage compartment for the waste container
▶ Storage compartment for the reflective vest
F
Storage compartment (depending on vehicle equipment):
▶ Phonebox
▶ USB-connections
The USB connections can be used for charging and for da-
ta transfer.
G
Storage tray
H
Storage tray
I
Openable armrest with storage compartment
In the compartment there is a storage compartment for the
tablet, a bottle rack with a content of max. 0.5 l and a re-
movable compartment.
The removable compartment can be stowed away in the
rear area of the storage compartment G .
J
Cup holder
K
Storage tray
A
Make up mirror
Max. load 0.25 kg
B
Ticket holder
A card holder is located in the compartment.
C
Car park ticket holder
› To open, press the button.
D
Storage tray
Max. load 3 kg
In the compartment, there is a card holder, a pen holder and
a storage compartment for coins.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст