Infiniti QX56 (Z62). Manual — part 843
INT-20
< REMOVAL AND INSTALLATION >
BODY SIDE TRIM
BODY SIDE WELT
BODY SIDE WELT : Removal and Installation
INFOID:0000000006220248
CAUTION:
Never damage the body.
REMOVAL
Front body side welt
1.
Remove front kicking plate inner and rear kicking plate inner. Refer to
INT-20, "KICKING PLATE INNER :
.
2.
Remove dash side finisher. Refer to
INT-18, "DASH SIDE FINISHER : Removal and Installation"
.
3.
Slide front seat assembly to the frontmost position.
4.
Remove center pillar lower garnish. Refer to
INT-22, "CENTER PILLAR LOWER GARNISH : Removal
5.
Remove front body side welt.
Rear body side welt
1.
Remove front kicking plate inner and rear kicking plate inner. Refer to
INT-20, "KICKING PLATE INNER :
.
2.
Slide front seat assembly to the frontmost position.
3.
Remove center pillar lower garnish. Refer to
INT-22, "CENTER PILLAR LOWER GARNISH : Removal
4.
Remove luggage side lower finisher. Refer to
INT-36, "LUGGAGE SIDE LOWER FINISHER : Removal
5.
Remove rear body side welt.
INSTALLATION
Install in the reverse order of removal.
KICKING PLATE INNER
KICKING PLATE INNER : Removal and Installation
INFOID:0000000006220249
CAUTION:
• When removing, always use a remover tool that is made of plastic.
• Never damage the body.
REMOVAL
Front kicking plate inner
Disengage front kicking plate inner fixing pawls and metal clips using
a remover tool (A) as shown by the arrow in the figure, and then
remove front kicking plate inner.
CAUTION:
Apply protective tape (B) to the body panel to protect from dam-
age.
Rear kicking plate inner
1.
Disengage rear kicking plate inner fixing pawls using a remover tool (A) as shown by the arrow in the fig-
ure, and then remove rear kicking plate inner (1).
CAUTION:
: Pawl
: Metal clip
JMJIA4021ZZ
BODY SIDE TRIM
INT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
Apply protective tape (B) to the body panel to protect from damage.
2.
Remove rear side bracket.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:
• Visually check the pawls and metal clips for deformation and damage during installation. Replace
with new ones if necessary.
• When installing front kicking plate inner and rear kicking plate inner, check that pawls and metal
clips are securely fitted in body panel holes, and press them in.
KICKING PLATE OUTER
KICKING PLATE OUTER : Removal and Installation
INFOID:0000000006220250
CAUTION:
• When removing, always use a remover tool that is made of plastic.
• Never damage the body.
REMOVAL
Front kicking plate outer
Disengage front kicking plate outer fixing pawls using a remover tool
(A) as shown by the arrow in the figure, and then remove front kick-
ing plate outer (1).
CAUTION:
Apply protective tape (B) to the body panel to protect from dam-
age.
Rear kicking plate outer
Disengage rear kicking plate outer fixing pawls using a remover tool
(A) as shown by the arrow in the figure, and then remove rear kick-
ing plate outer (1).
CAUTION:
Apply protective tape (B) to the body panel to protect from dam-
age.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
: Pawl
JMJIA4023ZZ
: Pawl
JMJIA4022ZZ
: Pawl
JMJIA4024ZZ
INT-22
< REMOVAL AND INSTALLATION >
BODY SIDE TRIM
CAUTION:
• Visually check the pawls for deformation and damage during installation. Replace with new ones if
necessary.
• When installing front kicking plate outer and rear kicking plate outer, check that pawls are securely
fitted in body panel holes, and press them in.
CENTER PILLAR LOWER GARNISH
CENTER PILLAR LOWER GARNISH : Removal and Installation
INFOID:0000000006220251
CAUTION:
Never damage the body.
REMOVAL
1.
Remove front kicking plate inner and rear kicking plate inner. Refer to
INT-20, "KICKING PLATE INNER :
.
2.
Slide front seat assembly to the frontmost position.
3.
Remove seat belt outer anchor. Refer to
SB-6, "SEAT BELT RETRACTOR : Removal and Installation"
.
4.
Disengage center pillar lower garnish fixing clips.
5.
Remove center pillar lower garnish according to the order of the
arrows shown in the figure.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:
• Visually check the clips for deformation and damage during installation. Replace with new ones if
necessary.
• When installing center pillar lower garnish, check that clips are securely fitted in body panel holes,
and press them in.
CENTER PILLAR UPPER GARNISH
CENTER PILLAR UPPER GARNISH : Removal and Installation
INFOID:0000000006220252
CAUTION:
• When removing, always use a remover tool that is made of plastic.
• Never damage the body.
REMOVAL
1.
Remove front kicking plate inner and rear kicking plate inner. Refer to
INT-20, "KICKING PLATE INNER :
.
2.
Slide front seat assembly to the frontmost position.
3.
Remove center pillar lower garnish. Refer to
INT-22, "CENTER PILLAR LOWER GARNISH : Removal
: Clip
JMJIA4025ZZ
BODY SIDE TRIM
INT-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
4.
Disengage center pillar upper garnish lower side fixing clip using
a remover tool (A).
5.
Pull center pillar upper garnish (1) from inside passenger room, disengage center pillar upper garnish
upper side fixing pawl as shown in the following figure, and then remove center pillar upper garnish from
center pillar panel (2).
CAUTION:
Be careful not to apply excessive force when removing center pillar upper garnish. Otherwise,
pawl may be damaged and fragments may drop in panel holes on body.
6.
Remove assist grip mounting bolts, and then remove assist grip.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:
• Replace center pillar upper garnish with a new part after removal. Never reuse center pillar upper
garnish.
• Visually check the clip and pawl for deformation and damage during installation. Replace with new
ones if necessary.
• When installing center pillar upper garnish, check that clip and pawl are securely fitted in body panel
holes, and press them in.
: Clip
: Pawl
JMJIA4026ZZ
JMJIA1176ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст