Infiniti G35 (V35) Sedan. Manual — part 9
ADP-30
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
MEMORY FUNCTION : Component Parts Location
INFOID:0000000000960601
JMJIA0161GB
1.
BCM M118, M119, M122, M123
2.
Automatic drive positioner control unit
M51, M52
3.
Driver seat control unit B451, B452
4.
Unified meter and A/C amp. M67
5.
AV control unit
With NAVI M87, M88
Without NAVI M83, M85
6.
AT assembly connector F51
7.
Tilt & telescopic switch M31
8.
Key slot M22
9.
Tilt sensor M48
10. Telescopic sensor M48
11.
Seat memory switch D5
12. Door mirror remote control switch
D17
A.
Dash side lower (Passenger side)
B.
View with instrument driver lower
panel removed
C.
Backside of seat cushion (driver side)
D.
Behind cluster lid C
E.
AT assembly
(TCM is built in AT assembly)
F.
View with instrument driver lower
panel removed
G
View with steering column cover low-
er and upper removed
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-31
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MEMORY FUNCTION : Component Description
INFOID:0000000000960602
CONTROL UNITS
13. Front door switch (driver side) B16
14. AT device (detention switch) M137
15. Parking brake switch B14
16. Door mirror (driver side) D3
17. Telescopic motor M49
18. Tilt motor M49
H.
View with center console assembly
removed
I.
View with center console assembly
removed
J.
View with instrument driver lower
panel removed
19. Side support (seat cushion)
(Side support unit B420)
20. Reclining motor B454
21. Side support (seatback)
(Side support unit B420)
22. Side support unit B420
23. Reclining switch
(Power seat switch B459)
24. Sliding, lifting switch
(Power seat switch B459)
25. Side support switch (seat back side)
B419
26. Side support switch (cushion side)
B419
27. Sliding sensor B453
28. Lifting motor (front) B455
29. Sliding motor B461
30. Lifting motor (rear) B456
K.
View with seat cushion pad and seat-
back pad removed
L.
Backside of the seat cushion
JMJIA0162GB
JMJIA0164GB
ADP-32
< FUNCTION DIAGNOSIS >
AUTOMATIC DRIVE POSITIONER SYSTEM
INPUT PARTS
Switches
Sensors
OUTPUT PARTS
EXIT ASSIST FUNCTION
Item
Function
Driver seat control unit
• The address of each part is recorded.
• Operates each motor of seat to the registered position.
• Requests the operations of steering column and door mirror to automatic drive
positioner control unit
Automatic drive positioner control unit
Operates the steering column and door mirror with the instructions from the driver
seat control.
Item
Function
Memory switch 1/2
The registration and memory function can be performed with its operation.
Item
Function
Door mirror sensor
(driver side/passenger side)
Detect the up/down and left/right position of outside mirror face.
Tilt & telescopic sensor
Detect the up/down and left/right position of steering column.
Lifting sensor (front)
Detect the up/down position of seat lifting (front).
Lifting sensor (rear)
Detect the up/down position of seat lifting (rear).
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Door mirror motor
(driver side/passenger side)
Move the outside mirror face upward/downward and leftward/rightward.
Tilt and telescopic motor
Move the steering column upward/downward and frontward/rearward.
Lifting motor (front)
Move the seat lifter (front) upward/downward.
Lifting motor (rear)
Move the seat lifter (rear) upward/downward.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat frontward/rearward.
Memory indicator
Illuminates or blinks according to the registration/operation status.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-33
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
EXIT ASSIST FUNCTION : System Diagram
INFOID:0000000000960603
EXIT ASSIST FUNCTION : System Description
INFOID:0000000000960604
OUTLINE
When exiting, the condition is satisfied, the seat is moved backward 40 mm (1.57 in) from normal sitting posi-
tion and the steering is moved to the most upper position and front position.
The seat slide amount and the steering operation at entry/exit operation can be changed.
NOTE:
• This function is set to OFF before delivery (initial setting).
• Further information for the system setting procedure. Refer to
ADP-9, "SYSTEM INITIALIZATION : Descrip-
OPERATION PROCEDURE
1.
Open the driver door with ignition switch in OFF position.
2.
Driver seat and steering column will move to the exiting position.
OPERATION CONDITION
Satisfy all of the following items. The exit assist function is not performed if these items are not satisfied.
DETAIL FLOW
JMJIA0116GB
Item
Request status
Ignition position
OFF
System setting [Entry/exit assist function (seat/steering)]
ON
Initialization
Done
Switch inputs
• Power seat switch
• Tilt & telescopic switch
• Door mirror remote control switch
• Set switch
• Memory switch
OFF
(Not operated)
AT selector lever
P position
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст