Volkswagen Golf / Golf GTI / Jetta. Manual — part 208
24-86
Continuation of check when
display reads approx. -37.0 C
- Disconnect 5-pin connector
(arrow) from Mass Air Flow (MAF)
sensor -G70- with Intake Air
Temperature (IAT) sensor -G42-.
If display jumps to approx. 126.0
C:
- Jumper connector terminals 1 and
3 using adapter cables from VAG
1594 and observe display.
- Press
button.
- Press buttons -0- and -6- for
function "End output" and confirm
entry with -Q- button.
- Switch off ignition.
Components, checking
24-87
- Replace Mass Air Flow (MAF) sensor -G70-
Page 24-30
, item 6 .
- Check DTC memory, repair malfunctions if
necessary and then erase DTC memory
Page
01-23
.
- Read readiness code
Page 01-146
. If DTC
memory has been erased or Motronic Engine
Control Module (ECM) -J220- was disconnected
from battery positive (B+), readiness code must
be generated again
Page 01-149
.
If display remains at approx. -37.0 C:
- Press
button.
- Press buttons -0- and -6- for function "End
output" and confirm entry with -Q- button.
- Switch off ignition.
- Check wiring referring to Electrical Wiring
Diagrams
Page 24-89
.
Components, checking
24-88
Continuation of check when
display reads approx. 126.0 C
If display jumps to approx. -42.0
C:
- Disconnect 5-pin connector
(arrow) from Mass Air Flow (MAF)
sensor -G70- with Intake Air
Temperature (IAT) sensor -G42-.
- Press
button.
- Press buttons -0- and -6- for
function "End output" and confirm
entry with -Q- button.
- Switch off ignition.
- Replace Mass Air Flow (MAF)
sensor -G70-
Page 24-30
,
item 6 .
- Check DTC memory, repair
malfunctions if necessary and
then erase DTC memory
Page
01-23
.
- Read readiness code
Page 01-
146
. If DTC memory has been
erased or Motronic Engine
Control Module (ECM) -J220- was
disconnected from battery
positive (B+), readiness code
must be generated again
Page
01-149
.
Components, checking
24-89
If display remains at approx. 126.0 C:
- Press
button.
- Press buttons -0- and -6- for function "End
output" and confirm entry with -Q- button.
- Switch off ignition.
- Check wiring referring to Electrical Wiring
Diagrams
Page 24-89
.
Checking wiring
- Remove wiper arms and cowl panel:
Repair Manual, Electrical Equipment; Repair
Group 92
- Connect VAG 1598/31 test box to control
module wiring harness. Engine Control Module
(ECM) -J220- remains disconnected.
Components, checking
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст