Volkswagen Golf / Golf GTI / Jetta. Manual — part 502
1. Self-locking hex nut, 60 Nm
¡
Always replace
2. Stop
3. Suspension strut turret
4. Hex nut, 60 Nm
5. Strut mount
6. Axial ball bearing
7. Bushing
Only installed to vehicles with
heavy duty suspension (PR No.
1GB)
This PR No. is entered on the
vehicle data label in luggage
Front suspension, servicing
8. Spring plate
9. Coil spring
¡
Observe color coding
¡
Surface of winding must not be
damaged
¡
Application to vehicle see
Vehicle data plate,
40-3,
Vehicle data sticker
10. Self-locking nut
¡
50 Nm plus an additional
1
/
4
turn 90
¡
Always replace
11. Hex bolt, 10 Nm
12. Bracket
13. Heat shield
14. Hex bolt
¡
Always replace
¡
The point on hex bolt must
point in normal direction of
travel
15. Clip
16. Wheel bearing housing
17. Self-locking nut
¡
60 Nm plus an additional
1
/
4
turn 90
¡
Never less than 90 !
¡
Turning angle tolerance 90
to 120
¡
Always replace
compartment or service booklet
Front suspension, servicing
18. Clamp
19. Connecting Link
20. Damper
¡
Can be replaced individually
¡
Application
See Parts
Catalog
21. Bump stop
22. Protective sleeve
Vehicle data sticker
Example of a vehicle data sticker
Various springs are installed depending on engine and
equipment level. Each spring is allocated to a certain weight
class.
For example
Weight class V46 - arrow - corresponds to coil spring 1J0
411 105 CD
Which springs are installed in the vehicle is documented on
the vehicle data label with relevant PR. number of weight
class.
With the help of this PR number you can find the
appropriate spring for the vehicle in the parts catalog.
Front suspension, servicing
The vehicle data sticker is located in spare wheel well and
in Maintenance booklet.
Suspension strut, removing and installing
Special tools, testers and auxiliary items required
n
Spreader 3424
n
Shock absorber set T10001
Removing
- Remove wheel.
Front suspension, servicing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст