Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 615
2
Special Tools
Special tools and workshop equipment required
♦ Seal Installer - Torque Converter Seal - T10175-
♦ Used Oil Collection and Extraction Unit - SMN372500-
♦ Puller - Seal Lever - VW681-
37 – Controls, Housing
1
Vehicle Diagnostic Tester , Connect‐
ing
Special tools and workshop equipment required
♦ Vehicle Diagnostic Tester
Volkswagen offers various testers, for example:
♦ Tester - VAS5051/11A-
The operation of these »devices« is described in the respective
operating instructions.
Vehicle Diagnostic Tester Connecting to the Data Link Connector
(DLC).
WARNING
♦ During a test drive you must always secure testing and
measuring equipment on the back seat.
♦ Only the passenger may use the equipment during the
road test.
– Turn on the Vehicle Diagnostic Tester .
The Vehicle Diagnostic Tester is ready for use when it is possible
to select between the fields/buttons
Guided Functions
and
Guided Functions
on the »right« side of the screen.
Depending on equipment and tester version, additional functions
may be »displayed«, for example:
♦
ElsaWin
♦
Test Instruments
♦
On Board Diagnostics (OBD)
»Tester« is Ready for Operation.
– Turn on the ignition.
– Touch a field/button on the display to start desired function.
2
Selector Mechanism
⇒ “2.1 Overview - Selector Mechanism”, page 19
⇒ “2.2 Selector Mechanism, Removing and Installing”,
page 21
⇒ “2.3 Selector Lever Cable, Removing and Installing”,
page 27
⇒ “2.4 Selector Lever Cable, Checking and Adjusting”,
page 30
⇒ “2.5 Emergency Release from P”, page 32
⇒ “2.6 Selector Lever Handle, Removing and Installing”,
page 33
⇒ “2.7 Button in Handle, Moving Into Installation Position”,
page 35
⇒ “2.8 Gearshift Mechanism, Checking”, page 36
⇒ “2.9 Multifunction Switch, Removing and Installing”,
page 37
⇒ “2.10 Multifunction Transmission Range Switch, Adjusting”,
page 40
⇒ “2.11 Selector Shaft Seal, Replacing”, page 41
2.1
Overview - Selector Mechanism
WARNING
Move the selector lever into “P” and set the parking brake be‐
fore working with the engine running.
1 - Shift Cover with Handle
❑ Do not remove the han‐
dle unnecessarily. Un‐
clip only the cover for
the emergency release.
Refer to
❑ Removing and instal‐
ling. Refer to
.
2 - Selector Mechanism
❑ With integrated Selector
Lever Sensor System
Control Module - J587-
with Selector Lever -
E313- , Tiptronic Switch
- F189- , Selector Lever
Park Position Lock
Switch - F319- and Shift
Lock Solenoid - N110-
❑ Do not grease the selec‐
tor lever cable.
❑ Removing and instal‐
ling. Refer to
❑ Checking and Adjust‐
ing. Refer to
3 - Bolt
❑ 4 Nm
❑ For attaching the selector mechanism to the selector housing
❑ Quantity: 4
4 - Plugs
5 - Nut with Collar
❑ M6 - 8 Nm
❑ M8 - 20 Nm
❑ Quantity: 4
6 - Selector Housing
7 - Clip
❑ For the selector lever cable on the bracket
❑ Is secured to the ATF cooler
8 - Transmission
9 - Cable Mounting Bracket
❑ For selector lever cable
❑ With installed grommet and spacer for the cable mounting bracket on the transmission
10 - Bolt
❑ 13 Nm
❑ Selector lever cable adjusting screw
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст