Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 630
– Turn off the engine.
• Place the Drip Tray or Used Oil Collection and Extraction Unit
- SMN372500- under the transmission.
– Remove the ATF check plug from the ATF pan -arrow-.
– Remove the overflow pipe -1- through check plug hole.
– Drain the ATF.
– Install the overflow pipe.
– Attach the Oil Filler - VAS6262A- to the oil bottle. Be sure to
– Install the Oil Filler - Adapter 2 - VAS6262/2- hand-tight in the
ATF-check hole.
– Fill with three liters of ATF. Refer to the Parts Catalog.
– Remove the Oil Filler - Adapter 2 - VAS6262/2- from the oil
pan and tighten the ATF check plug with the old seal.
– Move the selector lever into “P”.
– Start the engine.
– With brake depressed, move the selector lever through all the
different positions “P, R, N, D, S” at idle, holding it at each
position for at least 10 seconds.
– Move the selector lever into “P”.
– Check the ATF level. Refer to
⇒ “7.1 ATF Level, Checking”, page 73
Tightening Specifications
♦ Refer to
8
Special Tools
Special tools and workshop
equipment required
♦ Torque Wrench 5-50Nm -
VAG1331-
♦ Used Oil Collection and Ex‐
traction Unit - SMN372500-
♦ Vehicle Diagnostic Tester
♦ Shop Crane - Drip Tray -
VAS6208-
♦ Oil Filler - VAS6262A-
♦ Oil Filler - Adapter 2 -
VAS6262/2-
♦ Also for some oil containers
Oil Filler - Adapter 6 -
VAS6262/6-
♦ Engine Support Bridge -
10-222A-
♦ Engine Support Bridge -
Engine Support 29 -
10-222A/29-
♦ Engine Support Bridge -
Engine Support 18 -
10-222A/18-
♦ Engine/Gearbox Support
Shackle (2 pc.) - 10-222A/
12- (quantity 2)
♦ Transmission Support -
Pins 29 - 3282/29-
♦ Transmission Support -
3282-
♦ Gauge - Multi Function Switch - T10173-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст