Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 219
– Remove the front bumper cover. Refer to
⇒ “1.5 Bumper Cover, Removing and Installing”, page 317
– Remove the headlamps. Refer to ⇒ Electrical Equipment;
Rep. Gr. 94 ; Headlamp; Headlamp, Removing and Installing .
– Cut or saw the headlamp mount -4- evenly off the lock carrier
-1-.
– Position the rivet -5-.
– Position the new bracket -6- with the spring nut -7-.
– Tighten the bolt -8-.
Tightening Specifications
Component
Tightening Specification
Lock carrier bracket
5 Nm
1.4.2
Right Headlamp Mount
Note
The line -3- shows a possible crack.
– Remove the front bumper cover. Refer to
⇒ “1.5 Bumper Cover, Removing and Installing”, page 317
.
– Remove the headlamps. Refer to ⇒ Electrical Equipment;
Rep. Gr. 94 ; Headlamp; Headlamp, Removing and Installing .
– Cut or saw the headlamp mount -2- evenly off the lock carrier
-1-.
– Install the new bracket -4- with the spring nut -6-.
– Install the pop rivets -5-.
2
Fender
⇒ “2.1 Overview - Fender”, page 10
⇒ “2.2 Overview - Deformation Element”, page 11
⇒ “2.3 Fender, Removing and Installing”, page 11
⇒ “2.4 Fender Brace, Removing and Installing”, page 14
2.1
Overview - Fender
Note
The illustration shows the left side. The right side is identical.
1 - Fender
❑ Removing and instal‐
ling. Refer to
2 - Bolt
❑ 6 Nm
❑ Quantity: 2, A-pillar
3 - Bolt
❑ 6 Nm
❑ Quantity: 2, side sill
4 - Brace Insulation
❑ Inserted between the
fender and A-pillar.
5 - Fender Insulation
❑ Inserted between the
fender and the upper
wheel housing longitudi‐
nal member.
6 - Hex Nut
❑ Quantity: 2
❑ Tightening specification
-item 3-
7 - Guide
❑ Removing:
– Remove the front bump‐
er cover. Refer to
– Remove the hex nut -6-.
❑ There are different versions. Refer to the Parts Catalog for the allocation.
8 - Double Bolt
❑ 6 Nm
❑ Fender brace, quantity 2
9 - Fender Brace
❑ Removing and installing. Refer to
⇒ “2.4 Fender Brace, Removing and Installing”, page 14
10 - Bolt
❑ 6 Nm
❑ Fender connecting piece, quantity 3
11 - Deformation Element
❑ Front and rear. Refer to
⇒ “2.2 Overview - Deformation Element”, page 11
2.2
Overview - Deformation Element
1 - Front Deformation Element
2 - Bolt
❑ 6 Nm
3 - Rear Deformation Element
4 - Bolt
❑ 6 Nm
2.3
Fender, Removing and Installing
Special tools and workshop equipment required
♦ Torque Wrench 1783 - 2-10Nm - VAG1783-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст