Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 313
– Lift the door window -1- at the rear and pivot it forward out of
the window guides in direction of -2- -arrow-.
Installing
– Pivot the door window -1- into the window guides -2- in direc‐
tion of -arrow-.
Note
Make sure that the door window is inserted correctly in the window guide.
– Without using any pressure, guide the door window into the
window regulator clamping brackets.
– Align the door window to the rear window frame.
– Push the door window -1- into the clamping brackets until the
hooks -7- in the door window lock.
Installation is performed in reverse order of the removal.
– Check the function before installing the door inner cover -3-,
cable bushing -6-, and the door trim panel.
5.5
Rear Door Window, Removing and Installing
Removing
– Remove the rear door trim panel. Refer to ⇒ Body Interior;
Rep. Gr. 70 ; Rear Door Trim Panels; Rear Door Trim Panel,
Removing and Installing .
– Remove the door inner cover -8-. Refer to
⇒ “2.8 Door Inner Cover, Removing and Installing”,
.
– Lower the door window -9- just enough until the expanding pin
-3- and the spreader plug -4- are accessible in the opening for
the window regulator -2-.
Note
If the step is not possible due to a malfunction in the power window regulator, the window regulator motor -5-
is removed -7-. Then the door window can be moved to the necessary position.
– Screw a 5 mm screw (approximately 70 mm long) into the ex‐
panding pin -3- and remove the screw with the expanding pin
from the spreader plug -4-.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст