Volkswagen Golf / Golf GTI / Golf Variant. Manual — part 227
Removing
– Remove the hood -2-. Refer to
⇒ “1.3 Hood, Removing and Installing”, page 26
– If equipped, remove the caps -4-.
– Remove the bolts -3-.
– Remove the hinge -1-.
Installing
Install the hinge -1- in reverse order of removal.
– Install the hood -2-. Refer to
⇒ “1.3 Hood, Removing and Installing”, page 26
.
Tightening Specifications
1.11
Insulation, Removing and Installing
Special tools and workshop equipment required
♦ Pry Lever - 80-200-
Removing
– Pry the clips -2- out of the hood -3- using the Pry Lever -
80-200- .
– Remove the insulation -1- from the oblong holes in direction
of -arrows-.
Installing
– Slide the insulation -1- with the mounting tabs -arrows- into the
oblong holes.
– Lock all of the clips -2- into the hood -3-.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст