Volkswagen 01M Transmission. Manual — part 91
Removing and installing
38-3, Automatic
Transmission Hydraulic
Pressure Sensor 1 G193
and Automatic Transmission
Hydraulic Pressure Sensor 2
G194 , removing and
installing
Automatic Transmission
Hydraulic Pressure Sensor 1
G193
Removing and installing
38-3, Automatic
Transmission Hydraulic
Pressure Sensor 1 G193
and Automatic Transmission
Hydraulic Pressure Sensor 2
G194 , removing and
installing
Solenoid Valve 4 N91
Transmission Input Speed (RPM)
Sensor G182
Transmission Fluid Temperature
Sensor G93
Solenoid Valve 6 N93
Solenoid Valve 3 N90
Solenoid Valve 5 N92
Solenoid Valve 10 N283
Solenoid Valve 1 N88
More information on component functions and
troubleshooting component failures can be found in
Self-study program no. 89K303 6 Spd. Automatic
Transmission 09D All Wheel Drive .
Valve body, removing and installing
- If still installed, remove oil pan
38-1, Oil pan, removing
and installing
and oil strainer
38-2, ATF strainer,
removing and installing
.
Page 2 / 4
Valve body, overview
WWW.ALL-TRANS.BY
- Carefully disconnect connectors for Automatic
Transmission Hydraulic Pressure Sensor 1 G193 - 1 - and
Automatic Transmission Hydraulic Pressure Sensor 2
G194 - 2 - .
- Disconnect connector - arrow - .
- Carefully release connector and pull off.
Page 3 / 4
Valve body, overview
WWW.ALL-TRANS.BY
- The Transmission Fluid Temperature Sensor G93 must
be tightened to 10 Nm.
- Remove valve body bolts in diagonal sequence.
Tightening torque: 8 Nm plus an additional 90 .
- The Transmission Output Speed (RPM) Sensor G195
must be tightened to 10 Nm.
- Installation is in reverse order of removal.
- After installation, fill with ATF, check ATF level, and top
off
37-4, ATF level, checking
.
Page 4 / 4
Valve body, overview
WWW.ALL-TRANS.BY
38 - 5
Multi-Function Transmission Range (TR) Switch
F125 , removing, installing and adjusting
Special tools, testers and auxiliary items required
Setting Gauge T10173
Torque wrench V.A.G 1331
Removing
For reasons of clarity, the transmission is shown removed
throughout this procedure.
- Place selector lever in position "P" .
Page 1 / 4
Multi-Function Transmission Range (TR) Switch F125 , removing, installing and adjus...
WWW.ALL-TRANS.BY
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст