Volkswagen 01M Transmission. Manual — part 85
2 - Bolt, 10 Nm
3 - Bolt, 10 Nm
4 - Bolt, 10 Nm
Before tightening bolt, push in line
onto stop by hand
5 - Thermostat
a - ATF line
Moisten O-rings with ATF
b - ATF line
Moisten O-rings with ATF
ATF lines (vehicles with V8 and V10 diesel engine),
assembly overview
Page 2 / 9
ATF lines and ATF cooler
WWW.ALL-TRANS.BY
1 - Bolt, 25 Nm
Before tightening bolt, push in line
onto stop by hand
2 - Bolt, 8 Nm
3 - Bolt, 8 Nm
4 - Bolt, 10 Nm
Before tightening bolt, push in line
onto stop by hand
5 - Thermostat
a - ATF line
Moisten O-rings with ATF
b - ATF line
Moisten O-rings with ATF
ATF lines and ATF cooler, removing and installing
Removing
Overview of cooler
1 - Cooler for coolant
2 - Retaining clamps
3 - Condenser
Page 3 / 9
ATF lines and ATF cooler
WWW.ALL-TRANS.BY
4 - ATF cooler
5 - Cooler for power steering
6 - Lock carrier
- Remove noise insulation under engine
.
Repair Manual, Body Exterior, Repair Group 50,
- Remove front bumper
.
Repair Manual, Body Exterior, Repair Group 63,
- Bring lock carrier into service position
.
Repair Manual, Body Exterior, Repair Group 50,
- Remove bolt - 1 - and pull ATF lines out from thermostat
- 2 - .
- Plug ATF lines and thermostat with clean plugs.
- Remove front ATF lines to ATF cooler at thermostat - 2 -
. For this, counterhold at thermostat.
- Plug ATF lines and thermostat with clean plugs.
Page 4 / 9
ATF lines and ATF cooler
WWW.ALL-TRANS.BY
- Loosen clamps - arrow - for condenser - 1 - and ATF
cooler - 2 - .
- Remove ATF cooler with lines.
- Remove ATF lines at ATF cooler. For this, counterhold at
ATF cooler.
- Plug ATF lines and ATF cooler with clean plugs.
- Remove bolt for ATF line retainer on right of engine.
- Remove bolt for ATF line retainer on transmission.
- Remove ATF lines from transmission.
- Plug ATF lines and transmission with clean plugs.
Page 5 / 9
ATF lines and ATF cooler
WWW.ALL-TRANS.BY
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст