Geely Diagnosis Flow. Manual part — 69
Geely Diagnosis Flow. Manual part - 69
273
No.197 CD-player/radio memory function malfunction
Malfunction Cause
Solution
①
Power outputline B+ (memory line) and
ACC (ignition line) wrong connected to
each other
①
Check power source outputline B+ (memory
line) and ACC (ignition line), whether they are
wrong connected, and correct it when necessary.
②
Power outputline B+ (memory line)
connected on ACC (ignition line )
②
Check power source output line B+ (memory
line) whether it is connected on ACC (ignition
line), and correct it when necessary. (Note: please
connect according the method showing on
nameplate)
CD-player/radio memory
function malfunction
③
CD-player/radio inner memory circuit
short or open
Replace CD-player/radio assembly. `
No. 198 CD-player/radio no signal
Malfunction Cause
Solution
①
Antenna cable disconnected
①
Check antenna cable whether it is disconnected
②
Dirt on antenna cable conducting point
②
Clean conducting point with special cleaning
solution
③
Antenna cable deformed and results poor
conduct
③
Replace with new antenna assembly of same
specification
CD-player/radio no signal
④
CD-player/radio inner antenna cable
short circuit, open circuit
④
Replace CD-player/radio assembly
Connect B+ (memory line) back to memory power end
CD-player/radio memory function failure
Power outputline B+ (memory line) and ACC
(ignition line) wrong connected to each other
Power outputline B+ (memory line)
connected on ACC (ignition line )
CD-player/radio inner memory short or
open circuit
Correct B+ (memory line) and ACC (ignition line)
Replace CD-player/radio assembly
Normal
Normal
Abnormal
Abnormal
Abnormal
274
No.199 CD-player/radio sound distortion at large volume
Malfunction Cause
Solution
Loudspeaker retaining screw loose
Check loudspeaker retaining screws whether they
are loose, and tighten them when necessary.
Loudspeaker diaphragm deglue
Check loudspeaker diaphragm whether it is deglue,
and repair or replace loudspeaker when necessary.
Loudspeaker damage or disable to sustain
high power
Replace loudspeaker or turn down the volume
A loudspeaker rectifier burnt
Replace damaged loudspeaker
CD-player/radio sound
distortion at large volume
CD-player/radio inner short or open circuit
Replace CD-player/radio assembly;
Abnormal
CD-player/radio no signal
A
ntenna
cable disconnected
Dirts on
antenna
cable conducting point
Antenna
cable deformed and results poor contact
CD-player/radio inner
antenna
cable short circuit
Check
antenna
cable whether it is disconnected
Clean conducting point with special cleaning solution
Normal
Normal
Normal
Abnormal
Abnormal
Abnormal
Replace
antenna
assembly with same specification
Replace CD-player/radio assembly
Loudspeaker retaining screw loose
CD-player/radio sound distortion
at large volume
Loudspeaker damaged or disable to sustain
high power
Replace loudspeaker or turn down the
volume
Tighten the screws
CD-player/radio inner short or open circuit
Replace CD-player/radio assembly
Normal
Abnormal
Abnormal
Abnormal
275
No. 200 CD-player/radio tuner can’t stop
Malfunction Cause
Solution
①
Antenna cable disconnected
①
Check antenna cable whether it is disconnected
②
Dirt on antenna cable conducting point
Clean conducting point with special cleaning
②
solution. (Note: May clean with soft cloth, but neve
use solvents such as benzene or alcohol )
③
Antenna cable deformed and results poor
conduct
Replace
③
antenna assembly of same specification
CD-player/radio tuner
can’t stop
④
CD-player/radio inner antenna cable short
or open circuit
Replace CD
④
-player/radio assembly。
Antenna
cable disconnected
CD-player/radio tuner can’t stop
Dirts on
antenna
cable conducting point
Clean or replace
antenna
cable with same specification
Connect
antenna
cable
Antenna
cable deformed and results poor
conduct
Replace new atenna cable of same specification
CD-player/radio inner
antenna
cable short
or open circuit
Replace CD-player/radio assembly
Normal
Normal
Normal
Abnormal
Abnormal
Abnormal
Abnormal
276
No. 201 CD-player/radio has noise when receiving signal
Malfunction Cause
Solution
Antenna cable earth lead loose or
poor contact
Check antenna cable earth lead whether it is loose, replace i
of same specification or clean earth lead conducting point with
special clean solution if necessary.
Poor local radio signal
Change channel and test
Antenna cable earth lead deformed
and results poor conduct
Replace with new antenna cable of same specification
Antenna retaining screw loose
Check antenna cable retainig screws whether they are loose,
and tighten them if necessary.
Loudspeaker malfunction
Check loudspeaker, circuit and connector, and remove the
malfunctions according to different appearances.
CD-player/radio has
noise when receiving
signal
CD-player/radio inner malfunction
Replace CD-player/radio assembly
Replace
antenna
cable with same
specification
Antenna
cable earth lead loose or
poor contact abnormal
CD-player/radio has noise when
receiving signal
Poor local radio signal
Loudspeaker malfuction
Antenna
retaining screw loose
Change channel and test
Check and maintain loudspeaker and circuit
Tighten the screws
CD-player/radio inner malfunction
Replace CD-player/radio assembly
Normal
Normal
Normal
Normal
Abnormal
Abnormal
Abnormal
Abnormal
Abnormal
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст