Geely Emgrand X7. Manual part — 245
Geely Emgrand X7. Manual part - 245
3. Install the intake manifold seals.
FE02-0121b
4. Tighten the intake manifold
retaining bolts and nuts in the
sequence shown in the graph.
Note: The bolts and nuts can not
tighten to the specified torque at
once, otherwise it will result in the
intake manifold leakage. They should
be tightened at several stages to the
specified torques.
Torque force :30N.m(metric )
22.3lb-ft(English system)
1
3
5
2
4
FE02-0122b
5. Install the vacuum booster
vacuum tubes.
FE02-0123b
979
6. Install the canister solenoid valve
vacuum tube.
FE02-0124b
7. Install the forced ventilation
vacuum pipe of the crankcase.
8. Install the throttle body.
9. Install the engine hood.
10. Install negative cable of battery.
FE02-0125b
980
2.13.8.7 Engine supporting seat Replacement
Dismantlement Procedure
Warning: Refer to "Warning on
Battery Disconnection" in
"Warning and Precautions".
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 Battery
Cable Disconnection/Connection
Procedures.
2. Dismantle the plastic shield of
engine. Refer to 2.13.8.1
Replacement of Plastic Shield of
Engine.
3. Use horizontal jack to support
engine assembly.
Note: prior to support, a wood block
is placed between the jack and the
engine sump; otherwise
Damage the engine sump.
NL02-0113b
4. Dismantle connecting bolts
between right engine mount and
body/engine.
NL02-0114b
981
5. Dismantle the drive belt. Refer to
2.13.8.3 Replacement of Drive
Belt.
6. For dismantlement of the drive
belt tensioner, see 2.13.8.4
Replacement of Drive Belt
Tensioner.
7. Remove the connecting bolt for
the top generator bracket.
NL02-0115b
8. Dismantle the fixing bolts of
engine mount and Dismantle the
engine mount.
NL02-0116b
Installation Procedure:
1. Install and tighten the fixing bolts
of engine mount to the specified
torque.
Torque :45Nm(Metric) 33 .
3lb-ft(English system)
NL02-0117b
982
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст