Geely EC718, EC718RV, EC715, EC715RV. Manual part — 349
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 349
Installation Procedure:
FE08-0069b
1.
Install the condenser to the mount from the vehicle
bottom.
2.
Install the condenser front baffle and tighten the lower
retaining bolts.
Torque: 10-12 Nm (Metric) 7.4-8.9 lb-ft (US English)
1
2
1
3
3
FE08-0070b
3.
Lower the vehicle.
4.
Install and tighten the condenser top retaining bolts (1).
Torque: 11 Nm (Metric) 8.1 lb-ft (US English)
5.
Install and tighten the condenser upper air-conditioning
hard pipe fittings (2).
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
6.
Install and tighten the condenser front baffle upper
retaining bolts (3).
Torque: 12 Nm (Metric) 8.9 lb-ft (US English)
1
2
1
3
3
FE08-0070b
7.
Lift the vehicle, install and tighten the condenser lower air-
conditioning hard pipe fittings (1).
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
8.
Install and tighten the condenser front baffle lower
retaining bolts (2).
Torque: 12 Nm (Metric) 8.9 lb-ft (US English)
9.
Install the engine bottom shield.
10. Lower the vehicle and install the radiator upper grille.
11. Carry out the air-conditioning refrigerant filling procedure.
Refer to
Air-conditioning Refrigerant Recovery
Heating, Ventilation and A/C System
Automatic Air-conditioning
8-67
8.2.8.16 Ambient and Sun Light Sensor
Replacement
Refer to
.
8.2.8.17
Outside
Temperature
Sensor
Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
1
2
FE08-0054b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the engine bottom shield. Refer to
and Right Engine Bottom Shield Replacement
.
3.
Disconnect the outside temperature sensor wiring
harness connector (1).
4.
Remove the outside temperature sensor (2).
Installation Procedure:
2
1
FE08-0055b
1.
Install the outside temperature sensor (1).
2.
Connect the outside temperature sensor wiring harness
connector (2).
3.
Install the engine bottom shield.
4.
Connect the battery negative cable.
8-68
Automatic Air-conditioning
Heating, Ventilation and A/C System
8.2.8.18
Inside
Temperature
Sensor
Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
1
2
FE08-0060b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the instrument panel lower right side panel. Refer
to
.
3.
Disconnect the inside temperature sensor wiring harness
connector (1).
4.
Disconnect the air hose connection (2).
FE08-0061b
5.
Remove the inside temperature sensor.
Heating, Ventilation and A/C System
Automatic Air-conditioning
8-69
Installation Procedure:
3
1
2
FE08-0062b
1.
Install the inside temperature sensor (1).
2.
Connect the air hose connection (2).
3.
Connect the inside temperature sensor wiring harness
connector (3).
4.
Install the instrument panel lower right side panel.
5.
Connect the battery negative cable.
8.2.8.19 Evaporator Temperature Sensor and
Heat Core Temperature Sensor Replacement
Evaporator Temperature Sensor Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE08-0056b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the air-conditioning assembly. Refer to
Air-conditioning Assembly Replacement
3.
Separate the radiator and the blower assembly.
4.
Remove the evaporator core body. Refer to
.
5.
Remove the evaporator temperature sensor.
8-70
Automatic Air-conditioning
Heating, Ventilation and A/C System
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст