Geely EC718, EC718RV, EC715, EC715RV. Manual part — 114

2.6.8.13 Engine Replacement

Removal Procedure:

FE02-0460b

1.

Remove the battery negative cable. Refer to

2.11.8.1

Battery Disconnection

.

2.

Release the fuel pressure. Refer to

2.3.8.1

Fuel Pressure

Release Procedure

.

3.

Discharge the engine coolant. Refer to

2.8.8.1

Engine

Coolant Discharge and Filling

.

4.

Recover the air-conditioning refrigerant. Refer to

8.2.7.10

Air-conditioning Refrigerant Recovery and

Filling

.

5.

Remove the battery bracket. Refer to

2.11.8.2

Battery

Replacement

.

6.

Disconnect ECM harness connector.

FE02-0461b

7.

Disconnect the engine wiring harness connector and the
floor harness connector.

FE02-0462b

8.

Pull the engine wiring harness out of the firewall.

Engine

Engine Mechanical System JL4G18-D

2-371

FE02-0463b

9.

Disconnect pre-catalytic and post-catalytic oxygen sensor
wiring harness connectors.

FE02-0464b

10. Remove the engine wiring harness ground cable bolts.

FE02-0465b

11. Remove the air-conditioning compressor high and low

pressure connecting tubes.

2-372

Engine Mechanical System JL4G18-D

Engine

FE02-0466b

12. Remove the intake manifold assembly.

FE02-0467b

13. Removing the radiator inlet and outlet pipes.

Warning!

Refer to "Cooling System Service Warning" in
"Warnings and Notices".

FE02-0468b

14. Remove the air filter support.

15. Remove the vacuum booster vacuum tubes.

Engine

Engine Mechanical System JL4G18-D

2-373

FE02-0469b

16. Remove the clutch tube.

FE02-0470b

17. Disconnect the engine wiring harness to the underhood

fuse and relay box cables and connectors.

FE02-0471b

18. Remove battery negative cable gearbox shell ground

cable.

2-374

Engine Mechanical System JL4G18-D

Engine