Geely EC718, EC718RV, EC715, EC715RV. Manual part — 107
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 107
FE02-0113b
9.
Install and tighten the intake manifold clamp.
FE02-0114b
10. Install the throttle pull cable.
11. Connect the battery negative cable.
2.6.8.6
Intake
Manifold
Assembly
Replacement
Removal Procedure:
FE02-0115b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the hood. Refer to
3.
Remove throttle body. Refer to
.
4.
Remove the crankcase ventilation vacuum tube.
Engine
Engine Mechanical System JL4G18-D
2-343
FE02-0116b
5.
Remove the canister solenoid valve vacuum tube.
FE02-0117b
6.
Remove the vacuum booster vacuum tubes.
5
4
2
3
1
FE02-0118b
7.
Remove the intake manifold retaining bolts and nuts in the
sequence shown in the graphic.
2-344
Engine Mechanical System JL4G18-D
Engine
Installation Procedure:
FE02-0119b
1.
Clean the cylinder head intake manifold installation
surface.
FE02-0120b
2.
Clean the intake manifold installation surface.
FE02-0121b
3.
Install the intake manifold seals.
Engine
Engine Mechanical System JL4G18-D
2-345
1
3
5
2
4
FE02-0122b
4.
Tighten the intake manifold retaining bolts and nuts in the
sequence shown in the graphic.
Note
The bolts and nuts can not tighten to the specified
torque at once, otherwise it will result in the intake
manifold leakage. They should be tightened at
several stages to the specified torques.
Torque: 30 Nm (Metric) 22.3 lb-ft (US English)
FE02-0123b
5.
Install the vacuum booster vacuum tube.
FE02-0124b
6.
Install the canister solenoid valve vacuum tube.
2-346
Engine Mechanical System JL4G18-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст