Geely EC718, EC718RV, EC715, EC715RV. Manual part — 116

FE02-0478b

6.

Lift the vehicle.

7.

Install the left and right drive shafts.

8.

Install the front subframes.

FE02-0477b

9.

Install the steering cross pin bolts.

FE02-0476b

10. Tighten the gearbox oil discharge bolt and fill gearbox oil.

Refer to

3.3.8.1

Transmission Fluid Level Inspection

.

11. Lower the vehicle.

12. Install the front wheels.

13. Install the heater intake and outlet pipes.

Engine

Engine Mechanical System JL4G18-D

2-379

FE02-0475b

14. Install the throttle pull cable.

FE02-0474b

15. Install the gear lever pull cable.

FE02-0473b

16. Install canister vacuum tubes.

2-380

Engine Mechanical System JL4G18-D

Engine

FE02-0472b

17. Install the fuel pipe.

Note

The fuel pipe must be inserted into the fuel
distribution tube and then fastened after the second
boss.

FE02-0471b

18. Connect the battery negative cable gearbox shell ground

point.

FE02-0470b

19. Connect the engine wiring harness to the underhood fuse

and relay box cables and connectors.

Engine

Engine Mechanical System JL4G18-D

2-381

FE02-0469b

20. Install the clutch pipe and discharge the air. Refer to

3.2.6.3

Hydraulic Clutch Bleeding

.

FE02-0468b

21. Install the vacuum booster vacuum tubes.

FE02-0467b

22. Install the air filter support.

23. Install the radiator inlet and outlet pipes.

2-382

Engine Mechanical System JL4G18-D

Engine